Fresno Commercial Roofing

Coat the Roof You Have: Restoration in Fresno

Typical installed cost: $3.00 – $5.50 / sq ft

Dry deck, dry insulation, tired surface? Coat it. A fluid-applied silicone or elastomeric system can buy 10–15 more years and put reflectance back on the roof. Fresno's low rainfall helps here, since insulation tends to stay dry longer than in wetter regions. That makes more roofs coating candidates than owners expect. Re-roof triggers in the energy code can still apply, so check with the permit office first.

Overhead view of a flat-roofed warehouse with skylights and solar mounting rails, Madera

No tear-off bill

You skip $1.50–$3.50/sq ft in tear-off and landfill cost. Coatings bond to metal, mod-bit, BUR, TPO and foam.

Ponding is fine

Flat Valley roofs hold water after a rare winter storm or a clogged drain. Silicone does not mind standing water.

Cooler by the afternoon

White coatings knock surface temperature down on 105°F days. Less heat goes into the building below.

Scan before you spend

Infrared and nuclear-style moisture checks tell us if the roof can take a coating. If it cannot, we say so.

Roof Coatings & Restoration FAQs

What do coatings cost on a Valley flat roof?

Roughly $3.00–$5.50 per square foot, depending on product, prep and the condition of what is underneath.

Can a coating count for the cool roof rule?

A CRRC-listed coating with the right aged reflectance and emittance can satisfy Title 24, Part 6. Ask the City of Fresno which edition governs your permit.

Fresno Commercial Roofing serves Central Fresno, Downtown Fresno, Herndon Corridor, Clovis, Madera, Sanger and the San Joaquin Valley.